WRAP200 Wireless router–access point

Wireless router–access point (Wireless Router Access Point) WRAP2** is designed for organizing wireless networks based on IEEE 802.11 standards and for switching wireless network segments with a wired backbone data transmission network based on the IEEE 802.3 subgroup standard.

Advantages:

intrinsically safe mine-proof design, ensuring safe operation in underground workings of mines and pits hazardous due to gas and dust with constant presence of explosive atmosphere;
a wide range of antenna configurations, allowing the device to be used in various applications;
fast (seamless) roaming;
data transfer rate up to 1 Gbit/s;
quick installation and setup.

Different versions are available for order, depending on the type of antennas and brackets.

Versions:

WRAP200

equipped with a bidirectional circularly polarized antenna ANT-2DWBCP

WRAP201

equipped with a bidirectional flat-polarized antenna 2ANT-1DWB

WRAP202

equipped with an omnidirectional flat-polarized antenna ANT-ODWB

WRAP203

equipped with an N-type 0-degree adapter (for connecting approved antennas or radiating cable)

WRAP204

equipped with an N-type 45-degree adapter (for connecting approved antennas or radiating cable)

WRAP205

equipped with an N-type 90-degree adapter (for connecting approved antennas or radiating cable)

General characteristics:

Parameter name	Parameter value
Operating temperature	from minus 20°C to plus 40°C
Operating humidity	(98±2)% (with moisture condensation) at a temperature of (35±2)°C
Explosion protection marking	PO Ex ia I Ma
Degree of protection against external influences	IP65
Protection class against electric shock according to GOST 12.2.007.0-75	III
Overall dimensions without bracket (Length x Width x Height), max: WRAP200 WRAP201 WRAP202 WRAP203 WRAP204 WRAP205	300 x 125 x 41 mm 307 x 168 x 41 mm 314 x 125 x 41 mm 292 x 125 x 41 mm 292 x 125 x 41 mm 292 x 125 x 41 mm
Product weight without packaging, max	1.35 kg
Service life	10 years
Communication standards	IEEE 802.11 b/g/n IEEE 802.11a/n/ac IEEE 802.3
Wi-Fi functions	SSID (Up to 16 SSID, 8 per band) Frequency band 2.4/5 GHz Automatic channel assignment Transmit power control QoS (WMM) MU-MIMO Roaming (802.11rkv) Mesh (802.11s) Beamforming Band Steering Load balancing Speed limitation Wi-Fi statistics by: SSID / access point / client
Wi-Fi network protection	Access control authentication table MAC address filtering Wireless client isolation SSID–VLAN mapping 802.1X support WPA/WPA2/WPA3 AES (CCMP)
External circuits	Ethernet 100BASE-TX/1000BASE-T
Data transmission range via wireless channel in line-of-sight zone (depends on antenna type)	400–800 m
Maximum connection distance (UTP cat.5e)	100
Number of M20 cable entries (plastic)	3
Range of external diameters of connected cables	Ø = 6÷14
Operating supply voltage range	10.5…20 V
Nominal supply voltage	12 V
Nominal power, max	6 W
Wireless communication IEEE 802.11
Maximum transmitter output power 2.4 GHz	100 mW (20 dBm)
Maximum transmitter output power 5 GHz	200 mW (23 dBm)
Threshold transmitter power with antenna ANT-2DWBCP	2.4 GHz	5 GHz
	1000 mW (30 dBm)	800 mW (29 dBm)
ANT-ODWB	500 mW (27 dBm)	1000 mW (30 dBm)
2ANT-1DWB	800 mW (29 dBm)	3200 mW (35 dBm)